High Power 120W led street light energy saving

Detailed Product Description
120w Led Street Light Energy Saving
1.5W/LED Lamp
2.60% Energy Saving Road Lamp
3.Warranty 2 Years
4.CE&RoSH

120w led street light energy saving
1.5W/LED lamp
2.60% energy saving road lamp
3.warranty 2 years
4.CE&RoSH

(A) Feature of EATL high power LED road lamp

1.Multi-die packaging, the power of single chip can reach 5~12W.
2.Free chip packaging, light-emitting angle 180,better uniformity.
3.Thin(1.5 mm) PCB with series and parallel circuits, Quick Heat Transfer from front side to back side, Low Risk of Complete Malfunction, Easy Mass-production.
4.Highly Transparent(>97%) and Flexible Packaging Material, to eliminate the expansion and contraction stress.
5.Variable Voltage & Current Control with LED Driver, Power Efficiency > 90%, Steady Light-emitting.
6.Heat Sink Embedded with Heat Pipe, to secure the chip temperature below the maximum, allowable working temperature.
7.Various Color Temperature Available
Pure White: 6,000 ~ 8,000K
General White: 5,500 ~ 6,500K
Warm White: 2,700 ~ 4,500K
8.Face-down Fin Plate, to avoid the decay of lighting due to the accumulation of dust and bird drops .

Input Voltage
?220VAC/110VAC
?
Frequency Range
?47-63Hz
?
Power Efficiency
?>90%
?
LED Luminous Efficiency
?60LM/W~100LM/W
?
(%) Lamp's Efficiency
?>96%
?
(CRI) Color Rendering Index
?Ra>80
?
/ Light Distribution Curve/Beam Pattern
?/ Asym-metric(Batwing)/Rectangular Beam
?
Junction Temperature
?<75
?
IP Rating
?Power supply IP66; the remaining components are IP65
?
Working Life
?>50,000
?

??? (B)Whats the difference compared to others

Lighting Source:High luminous flux, illuminate further
1.? Multi-die Packaging, the power of single LED chipset can reach 5W, which insure the luminous flux strong enough to reach the road.more suitable for long-distance lighting, especially for street lighting.

2.? Free Chip Packaging, Light-emitting Angle 180, better uniformity and effeciency.

3.? Protection: ESD, EMC, Lighting Protection, Over Temp.

Heat Sink: Better thermal management, no luminous decay
1.? Owe to excellent thermal management, we hace a record of luminous decay <2%,after using 20 monthes, and 0 maintenance cost, ranking 1st in ourdoor test orgnized by Tianjin Municipal Government.

2.? Heat Sink Embedded with Heat Pipe. Point heat source can be converted into line heat. The heat transfer rate of the heat pipe is about 100 times of that of copper.

3.? Face-down Aluminum Heat Sink to avoid the accumulation of dust and bird drops.

Power Supply: Best quality power system, Stable and long lifetime
1.? LED Driver IC applied, Power Efficiency > 95%. WPT. Intelligent power regular. Best quality and stable.

2.? Variable Voltage and Variable Current Control Mode, Steady Light-emitting.

3.? Over Voltage Protection; Over Current Protection; Surge Current Protection.

???? (C)More information:

??????? 60%~70% energy saving

??????? Lifetime>60,000h

??????? Revolutionary photometric design, better uniformity

??????? Environment friendly, No UV, IR, or mercury

??????? High color index, Ra>85

??????? Revolutionary module design, IP65

??????? Low-cost installation

??????? Top ranking of performance test

??????? Instant start

??????? CE and RoSH certificates

?? (D) More photos

Distribution of? illuminance

125W/bilateral opposite/10m high/35m pole pitch/14m road width/ 25 gradient degrees

Distribution of? illuminance

90W/bilateral opposite/8m high/30m pole pitch/14m road width/ 25 gradient degrees

120W in Jiashan subsidiary road

?